Labourdonnais Lady Blue 40% 0,7L

Marsoni

M251S

$50.00

Get it in 3 business days with 1 day shipping. Friday, May 29

Labourdonnais Lady Blue 40% 0,7LLabourdonnais verlsst sich auf regional angebaute Rohstoffe, so auch bei diesem Spirit Drink aus Zuckerrohrsaft statt aus Melasse. Nach der Destillation reifte er sechs bis zwlf Monate in ehemaligen Bourbonfssern aus amerikanischer Weieiche, bevor er mit natrlichen Zutaten aromatisiert wurde und mit einem Alkoholgehalt von 40 % vol auf den Markt kam. Das Ergebnis ist ein Drink mit einem sen ersten Eindruck von Vanille und einem wrzigen Unterton, der

Easy Shipping

Quick Dispatch:

Your Labourdonnais Lady Blue 40% 0,7L orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your Labourdonnais Lady Blue 40% 0,7L ships.

Need Help?
Questions about Labourdonnais Lady Blue 40% 0,7L, sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for Labourdonnais Lady Blue 40% 0,7L in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on April 16, 2026