2217K Budget Taper Bored Self Aligning Ball Bearing (Adaptor Sleeve Available-Met/Imp) 85x150x36mm

2217K Budget Taper Bored Self Aligning Ball Bearing (Adaptor Sleeve Available-Met/Imp) 85x150x36mm

Marsoni

M251S

$101.29

Get it in 3 business days with 1 day shipping. Friday, May 29

2217K Budget Taper Bored Self Aligning Ball Bearing (Adaptor Sleeve Available-Met/Imp) 85x150x36mmSelf aligning ball bearings consist of two parallel rows of balls, a common sphere shaped raceway located in the outer ring and two deeper raceway grooves in the inner ring. The bearings are impervious to angular misalignment of the shaft when deflecting. SKF self aligning bearing come in either open type or rubber sealed. Self aligning Bearings with the suffix K in their title are taper bored, because of this they will require an adapter sleeve, an

Easy Shipping

Quick Dispatch:

Your 2217K Budget Taper Bored Self Aligning Ball Bearing (Adaptor Sleeve Available-Met/Imp) 85x150x36mm orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your 2217K Budget Taper Bored Self Aligning Ball Bearing (Adaptor Sleeve Available-Met/Imp) 85x150x36mm ships.

Need Help?
Questions about 2217K Budget Taper Bored Self Aligning Ball Bearing (Adaptor Sleeve Available-Met/Imp) 85x150x36mm, sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for 2217K Budget Taper Bored Self Aligning Ball Bearing (Adaptor Sleeve Available-Met/Imp) 85x150x36mm in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on June 1, 2025

Verified Purchase

Nate Higgers

Omaha, US

★★★★★ 5

great value

Size: 16AWG Wiring Harness-2 Leads

very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on April 30, 2026

Verified Purchase

Lee Mintz

Battle Creek, US

★★★★★ 5

The Easiest!

Size: 16AWG Wiring Harness-2 Leads

This is one of the best and easiest wiring system to install that I have every used. And the price is great!

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on June 11, 2025

Verified Purchase