Graco 289238 Finex Air Spray Gravity Feed HVLP Gun 0.051 in (1.3 mm) needle/ nozzle size - Standard

Graco 289238 Finex Air Spray Gravity Feed HVLP Gun 0.051 in (1.3 mm) needle/ nozzle size - Standard

Marsoni

M251S

$139.75

Get it in 3 business days with 1 day shipping. Friday, May 29

Graco 289238 Finex Air Spray Gravity Feed HVLP Gun 0.051 in (1.3 mm) needle/ nozzle size - StandardWell balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies. Aircaps optimized for high quality spray performance Lightweight, ergonomic gun Lightest trigger pull in its category Integrated air inlet adjustment Air Inlet Size (in) 1 4 Air Inlet Thread Type NPSM Applicator Type Manual Bleed Type Non Bleeder Body Material

Easy Shipping

Quick Dispatch:

Your Graco 289238 Finex Air Spray Gravity Feed HVLP Gun 0.051 in (1.3 mm) needle/ nozzle size - Standard orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your Graco 289238 Finex Air Spray Gravity Feed HVLP Gun 0.051 in (1.3 mm) needle/ nozzle size - Standard ships.

Need Help?
Questions about Graco 289238 Finex Air Spray Gravity Feed HVLP Gun 0.051 in (1.3 mm) needle/ nozzle size - Standard, sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for Graco 289238 Finex Air Spray Gravity Feed HVLP Gun 0.051 in (1.3 mm) needle/ nozzle size - Standard in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on December 16, 2020

Verified Purchase

Marina De Leon

Grantham, US

★★★★★ 5

Nice

Size: 16AWG Wiring Harness-2 Leads

Worked great, easy to install

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on January 8, 2026

Verified Purchase

Dan from Georgia

Whiting, US

★★★★★ 4

Wire length between the two connectors is short for a full-size pickup

Size: 16AWG Wiring Harness-2 Leads

I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on June 1, 2025

Verified Purchase

Nate Higgers

Omaha, US

★★★★★ 5

great value

Size: 16AWG Wiring Harness-2 Leads

very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on April 30, 2026

Verified Purchase

Lee Mintz

Charlottesville, US

★★★★★ 5

The Easiest!

Size: 16AWG Wiring Harness-2 Leads

This is one of the best and easiest wiring system to install that I have every used. And the price is great!

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on June 11, 2025